MICA T-605-C
WATER BORNE MATTE COATING FOR FILMS
MICA T-605-C is a single-pass, 2 part aqueous matte coating for most plastic films. It offers good transparency and scratch resistance. It can be laminated or heat sealed at temperatures up to 350°F (175°C). When properly applied the coating has a 60° gloss of about 10 units.
Characteristics
| Type | Urethane |
| Appearance | Milky White |
| Solids | 30 |
| pH at 25oC | ~ 8 |
| Viscosity at 25C | 500 |
| FDA Status | None |
* All components of the product are listed in the corresponding US FDA regulation(s). The clearances are subject to the specific end-use and extractive limitations cited in the regulations and it is the responsibility of the manufacturer of the food-contact article to determine whether the prescribed conditions are satisfied (e. g. a functional barrier exists between the primer and the food).